Departamento de Ingeniería Química, Ambiental y de los Materiales

URI permanente para esta comunidadhttps://hdl.handle.net/10953/42

En esta Comunidad se recogen los documentos generados por el Departamento de Ingeniería Química, Ambiental y de los Materiales y que cumplen los requisitos de Copyright para su difusión en acceso abierto.

Examinar

Mostrando 1 - 1 de 1

Effect of steel slag and curing temperature on the improvement in technological properties of biomass bottom ash based alkali-activated materials
(Elsevier, 2021-10) Gómez-Casero, Miguel A.; Pérez Villarejo, Luis; Castro, Eulogio; Eliche Quesada, Dolores
In this research the effect of the incorporation of black steel slag (BSS) (25, 50 and 75 wt%) into biomass bottom ash (BBA) as precursor in the synthesis of alkali-activated materials was studied. The alkali-activated pastes were cured at two temperatures, 60 and 20 °C. Thermal curing at 60 °C produced an increase in mechanical properties at early curing ages obtaining similar properties at older ages of 90 days. The addition of up to 50 wt% of BSS resulted in alkali-activated cements with increased compressive and flexural strengths. The increase in mechanical properties could be due to the formation of a higher amount of calcium aluminosilicate gel (C-A-H-S) with respect to potassium aluminosilicate gel (K-A-H-S) or to the synergistic formation of C-K-A-S-H gel. Therefore, these specimens can be used as a binding material for concrete production to replace Portland cement, which can lead to significant environmental and socio-economic improvements by reducing CO2 emissions and consumption of natural resources.

RUJA: Repositorio Institucional de Producción Científica

Examinar

Examinando Departamento de Ingeniería Química, Ambiental y de los Materiales por Materia "Alkali-activated materials"